How To Use: Urine Stain & Odour Remover

How To Prepare - 750ml Spray

1. Fill Your 750ml Ready-To-Use bottle with water.

2. Add 25ml of concentrate to the 750ml bottle.

3. Screw on the trigger, and give the bottle a shake to incorporate all the ingredients. It’s now ready to use!

How To Use - Remove Stain/Odour

1. Remove any excess urine or organic matter from the surface then apply Urine Stain & Odour Remover

2. If a strong odour/stain persists, allow the product to sit for 5-10 minutes to effectively target the source.

3. Use a microfiber cloth to wipe the area, eliminating excess product and the stain/odour. For stubborn stains, gently scrub the area with a soft brush to help lift the stain.

4. Rinse the area with a clean damp cloth and blot dry with a towel to remove any remaining residue. Repeat the process if necessary to ensure complete stain and odour remover

5. In areas where there is direct sunlight into the room, ensure that the warm sunlight does not evaporate the solution before it does it’s work.

6. Ensure the area is well-ventilated to aid in drying and to dissipate any lingering scent from the cleaning solution.

Please Note:

For old Stains and odour that has built up over time

double the dosage to 50ml per 750ml bottle and increase dwell time

Urine Odour & Stain Remover - Information

Important information

Old Stains: To effectively treat an old stain, begin by moistening it with a damp sponge. This softens the stain, allowing the enzyme to work more efficiently.

Odours on Soft Surfaces: For any unpleasant odour, spray the affected area thoroughly to ensure the enzyme reaches the source. Keep in mind that multiple applications may be necessary when addressing stubborn odours.

Using the Product: It’s best to start with clean cloths or mops to achieve optimal results.Storage Instructions: Always store the product in an upright position, ensuring the cap is tightly sealed to prevent leakage and evaporation. It’s important to keep the product out of reach of children and pets.

If you have used another product to clean up the mess, you need to remove the previous product from the carpet or floor before using the enzyme based product, this will allow the enzymes to get to the source.

By following these guidelines, you can ensure that your surfaces remain clean, fresh, and free from stubborn stains and odours.achieve the best results. Residual chemicals from other cleaners may interfere with the enzymatic action, reducing the effectiveness of the Urine Stain & Odour Remover.

Always perform a patch test on an inconspicuous area to ensure the product does not cause discoloration or damage.

By carefully following these instructions and safety tips, you ensure a hassle-free cleaning experience, while maintaining the longevity and appearance of your surfaces. Remember, patience and thoroughness are key when dealing with persistent stains and odours.